Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Compartment Front Panel Bolt | 22 N.m (16 lb ft) |
| Front End Sheet Metal Cross Brace Bolt@Impact Bar Bracket | 9 N.m (80 lb in) |
| Front End Sheet Metal Cross Brace Bolt@Plenum | 22 N.m (16 lb ft) |
| Front End Sheet Metal Diagonal Brace Nut | 22 N.m (16 lb ft) |
| Front Fender Bolt | 9 N.m (80 lb in) |
| Front Fender Front Brace Bolt | 9 N.m (80 lb in) |
| Front Fender Nut | 9 N.m (80 lb in) |
| Front Side Door Check Link Bolt | 22 N.m (16 lb ft) |
| Front Side Door Check Link Nut | 11.5 N.m (102 lb in) |
| Front Side Door Hinge Bolt - Body Side | 32 N.m (24 lb ft) |
| Front Side Door Hinge Bolt - Door Side | 25 N.m (18 lb ft) |
| Front Suspension Strut Upper Mounting Nut | 22 N.m (16 lb ft) |
| Headlamp Bolt | 2.5 N.m (22 lb in) |
| Hood Hinge Bolt | 22 N.m (16 lb ft) |
| Hood Hinge Nut | 22 N.m (16 lb ft) |
| Hood Primary and Secondary Latch Bolt | 9 N.m (80 lb in) |
| Plenum Front Panel Bolt | 9 N.m (80 lb in) |
| Plenum Front Panel Nut | 9 N.m (80 lb in) |
| Rear Compartment Lid Bolt | 9 N.m (80 lb in) |
| Rear Compartment Lid Hinge Bolt | 9 N.m (80 lb in) |
| Rear Side Door Check Link Body Side Bolt | 22 N.m (16 lb ft) |
| Rear Side Door Check Link Door Side Nut | 11.5 N.m (102 lb in) |
| Rear Side Door Hinge Bolt - Body Side | 32 N.m (24 lb ft) |
| Rear Side Door Hinge Bolt - Door Side | 25 N.m (18 lb ft) |