Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a double layer of masking tape around the perimeter of the painted surfaces.
Disconnect the rear side door wiring harness (1) electrical connector. Rear Side Door Wiring Harness Replacement
Rear Side Door Check Link Body Side Bolt(2) - Remove - Rear Side Door Check Link Replacement
Mark the location of the rear side door hinges with a grease pencil to aid in alignment during installation.
- Support the door before removing the hinge fastener.
- Rear Side Door Hinge Bolt - Door Side(1) - Remove [4x] - Rear Side Door Upper Hinge and Lower Hinge Replacement
- With the aid of an assistant, remove the rear side door (2).
- Transfer components as necessary.