Hood Rear Outer Air Inlet Seal Replacement (without Blackwing)
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout |
Component Name |
| 1 |
Hood Rear Outer Air Inlet Seal Retainer [2x] |
| 2 |
Hood Rear Outer Air Inlet Seal
Procedure
Using a trim type tool, release the retainer and gentle pull up on the seal to remove. |