Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Attach the mechanics wire to the new hood primary latch release cable (2) and guide the cable in.
- Install the hood primary latch release cable grommet (1) to the dash panel.
Attach the hood primary latch release cable end retainer to the inside handle (1).
Attach the hood primary latch release cable end retainer (1) to the latch.
- Install the hood primary latch release cable to the 2 retainer (2).
- Plenum Drain Valve - Install - Plenum Drain Valve Replacement
Front Compartment Front Sight Shield (2) - Install - Front Compartment Front Sight Shield Replacement