Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to Glass and Sheet Metal Handling Warning .

WARNING:

Disconnect the power window switch when working inside the door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury.

Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Garnish Molding (2) - Remove - Front Side Door Window Garnish Molding Replacement
Remove the appropriate front side door water deflector.
- Front Side Door Water Deflector Replacement - Driver Side
- Front Side Door Water Deflector Replacement - Passenger Side
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Inner Window Sealing Strip (1) - Remove - Front Side Door Window Inner Sealing Strip Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Belt Reveal Molding (2) - Remove - Front Side Door Window Belt Reveal Molding Replacement
Place the front side door window in the full up position and tape in place.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Regulator Sash Retainer (1) - Release [2x]
Place the front side door window regulator in the full down position.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Channel Retainer (2) - Remove - Front Side Door Window Channel Retainer Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use care when removing the front side door window (1) not to scrape the glass against exposed metal edges inside the front side door frame.

Remove the masking tape holding the front side door window (1) and lower the window downward while pulling up on the front to remove the window from the door frame.