Air Inlet Grille Panel Extension Replacement - Right Side
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
| 1 |
Air Inlet Grille Panel Extension - Right Side Procedure
- Apply two layers of masking tape around the top edge of the service part to prevent paint damage.
- Using a suitable flat bladed plastic tool, release the air inlet grille panel extension clips.
- Using a 50/50 mixture of isopropyl alcohol and clean drinkable water and a clean towel, remove the left over adhesive residue from the masking tape.
|