Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to SIR Warning .
WARNING:
WARNING:
In order to prevent accidental deployment and the risk of personal injury, do not dispose of an undeployed inflatable restraint seat belt pretensioner as normal shop waste. Undeployed seat belt pretensioners contain substances that could cause severe illness or personal injury if their sealed containers are damaged during disposal. Use the following deployment procedures to safely dispose of an undeployed seat belt pretensioner. Failure to observe the following disposal methods may be a violation of appropriate country, regional or local laws.
- Disable the SIR system. SIR Disabling and Enabling
Front Seat Belt Anchor Plate Tensioner Cover (1) - Remove
- Front Seat Belt Anchor Plate Tensioner Bolt- Upper (2) - Remove
Center Pillar Lower Trim Panel (1) - Remove
Front Seat Belt Anchor Plate Tensioner Bolt- Lower (1) - Remove
- Disconnect the electrical connector.
- Front Seat Belt Anchor Plate Tensioner (2) - Remove
- Pretensioner Handling and Scrapping