Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Install the wiring harness clips of the front floor console wiring harness (1) to the front floor console retainer (2).
Front Floor Console Wiring Harness (1) - Install
Front Floor Console Wiring Harness (1) - Install
Connect the electrical connector.
- Front Floor Console Cup Holder (1) - Install
Front Floor Console Armrest Bolt (1) - Install and tighten [2x] 6 N.m (53 lb in)
- Front Floor Console Cup Holder Bolt (2) - Install and tighten [5x] 2.5 N.m (22 lb in)
- Install the front floor console bin lamp (3) to the front floor console cup holder.
Front Floor Console Cup Holder Bolt (1) - Install and tighten [6x] 2.5 N.m (22 lb in)
Connect the electrical connectors.
- Front Floor Console Trim Plate (1) - Install
Front Floor Console Rear Trim Panel (1) - Install - Front Floor Console Rear Trim Panel Replacement (Blackwing)
Front Floor Console (1) - Install - Front Floor Console Removal and Installation (Blackwing)