Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
With the aid of an assistant, install the console to the vehicle. (1)
Connect the electrical connectors (1) to the front floor console wiring harness.
- Front Floor Console Bracket Bolt (2) - Install and tighten to 7 N.m (62 lb in)
- Front Floor Console Bolt (3) - Install and tighten [3x] 7 N.m (62 lb in)
Connect the electrical connectors (1) to the front floor console wiring harness and automatic transmission electronic control.
- Front Floor Console Bracket Bolt (2) - Install and tighten to 7 N.m (62 lb in)
- Front Floor Console Bolt (3) - Install and tighten [3x] 7 N.m (62 lb in)
Front Floor Console Rear Trim Panel (2) - Install - Front Floor Console Rear Trim Panel Replacement
Front Floor Console Extension Panel - Left Side (1) - Install - Front Floor Console Extension Panel Replacement - Left Side
Front Floor Console Extension Panel - Right Side (1) - Install - Front Floor Console Extension Panel Replacement - Right Side
CAUTION:
Refer to Fastener Caution .