Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Front Floor Console Cup Holder (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest Bolt (1) - Install and tighten [2x] 6 N.m (53 lb in)
Front Floor Console Cup Holder Bolt (2) - Install and tighten [5x] 2.5 N.m (22 lb in)
Install the lens of the front floor console bin lamp (3) to the front floor console cup holder.
Courtesy of GENERAL MOTORS COMPANY

Multimedia Receptacle (1) - Install - Multimedia Receptacle Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Left Side (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cup Holder Bolt (1) - Install and tighten [6x] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Right Side (1) - Install
Return the seat to its original position.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Trim Panel (1) - Install - Front Floor Console Rear Trim Panel Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Install - Front Floor Console Trim Plate Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Accessory Power Rear Receptacle Retainer (1) - Install - Front Floor Console Accessory Power Rear Receptacle Retainer Replacement (Front Floor Console Armrest Blackwing)