Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Remove the front seat back cover and pad as an assembly. It is not necessary to separate them.

Front Seat Back Cover and Pad (1, 2) - Remove - Front Seat Back Cover and Pad Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Seat Outboard Seat Back Airbag (2) - Remove - Front Seat Outboard Seat Back Airbag Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Head Restraint Frame (2) - Remove - Front Seat Head Restraint Frame Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Head Restraint Guide (1) - Remove [2x] - Front Seat Head Restraint Guide Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Seat Back Upper Support (4) - Remove - Front Seat Back Upper Support Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Back Side Bolster Bladder (1) - Remove [2x] - Front Seat Back Side Bolster Bladder Replacement
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector and reposition the wiring harness as necessary.
Release the front seat back lumbar pump retainer and reposition the pump.
Release the retainers.
Front Seat Lumbar Support (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Disconnect and reposition harness as necessary.
Front Seat Upper Bolt (1) - Remove [4x]
Front Seat Back Frame (2) - Remove
Transfer components as necessary.