Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Ensure the seat heater is not folded or creased during installation as damage to the internal circuitry may occur, causing performance issues and damage to seat components.

If replacing the front seat back pad (2), install NEW front seat back heater and front seat back vent fan mat, if equipped.
Front Seat Back Pad (2) - Install
Front Seat Back Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Seat Outboard Seat Back Airbag Nut (1) - Install - Front Seat Outboard Seat Back Airbag Replacement
Connect the J-channel retainers.
Connect all electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

{If equipped} Front Seat Back Ventilation Blower (2) Install - Front Seat Back Ventilation Blower Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Back Cushion Finish Panel (1) - Install - Front Seat Back Cushion Finish Panel Replacement
Courtesy of GENERAL MOTORS COMPANY

Driver or Passenger Seat Head Restraint Guide (1) - Install - Front Seat Head Restraint Guide Replacement
Courtesy of GENERAL MOTORS COMPANY

Driver or Passenger Seat Head Restraint (3) - Install - Front Seat Head Restraint Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Inner Adjuster Front Finish Cover (2) - Install - Front Seat Inner Adjuster Front Finish Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Outer Finish Cover (3) - Install - Front Seat Cushion Outer Finish Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Seat (2) - Install - Front Seat Removal and Installation
Enable the SIR System. SIR Disabling and Enabling