Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Bumper Energy Absorber Bolt | 22 N.m (16 lb ft) |
| Front Bumper Fascia Air Deflector Bolt | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Bolt | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Center Air Deflector Bolt | 5 N.m (44 lb in) |
| Front Bumper Fascia Center Air Deflector Screw | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Center Support Bolt | 9 N.m (80 lb in) |
| Front Bumper Fascia Guide Bolt | 2.5 N.m (22 lb in) |
| Front Bumper Fascia Support Brace Bolt | 9 N.m (80 lb in) |
| Front Bumper Impact Bar Bolt | 32 N.m (24 lb ft) |
| Front Bumper Shutter Bolt | 2 N.m (18 lb in) |
| Front Bumper Shutter Bolt- Upper | 2.5 N.m (22 lb in) |
| Rear Bumper Fascia Bolt | 2.5 N.m (22 lb in) |
| Rear Bumper Fascia Molding Bolt | 2.5 N.m (22 lb in) |
| Rear Bumper Impact Bar Nut | 58 N.m (43 lb ft) |
| Rear Fascia Bolt | 2.5 N.m (22 lb in) |