Rear Bumper Impact Bar Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Rear Bumper Fascia Removal and Installation (without Blackwing) Rear Bumper Fascia Removal and Installation (with Blackwing) Exhaust Rear Muffler Insulator Replacement (LSY)Exhaust Rear Muffler Insulator Replacement (LGY, LT4)
1	Rear Bumper Impact Bar Nut [4x] CAUTION: Refer to Fastener Caution . Tighten 58 N.m (43 lb ft)
2	Rear Bumper Impact Bar Procedure Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Rear Bumper Fascia Removal and Installation (without Blackwing) Rear Bumper Fascia Removal and Installation (with Blackwing)
Exhaust Rear Muffler Insulator Replacement (LSY)Exhaust Rear Muffler Insulator Replacement (LGY, LT4)

Rear Bumper Impact Bar Nut [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
58 N.m (43 lb ft)

Rear Bumper Impact Bar
Procedure
Transfer components as necessary.