Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner Bolt- Left Side and Right Side (1) Remove [4x] Rear Wheelhouse Liner Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Bumper Fascia Bolt- Left Side and Right Side (1) - Remove [10x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner- Left Side and Right Side (1) - - Reposition
Rear Bumper Fascia Bolt- Left Side and Right Side (1) Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Rear Bumper Fascia Bolt (1) - Remove [7x]
Courtesy of GENERAL MOTORS COMPANY

Carefully push a small nylon wedge between the fascia (1) and the fascia guide on the left and right sides. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia.
Courtesy of GENERAL MOTORS COMPANY

Release the 3 left and right side rear bumper fascia retainer clips (1) from the rear bumper fascia reinforcement.
Courtesy of GENERAL MOTORS COMPANY

Rear Bumper Fascia (1) - Remove
Disconnect all electrical connectors.