Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Impact Bar (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Transmission Fluid Auxiliary Cooler Bracket Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Impact Bar Bolt (1) Install and tighten [8x] 32 N.m (24 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Horn (2) - Install - Horn Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Air Duct Retainer (1) - Install [2x]
Install the 4 wire harness retainers from the front bumper impact bar.
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Support Brace (2) - Install - Front Bumper Fascia Support Brace Replacement (Without Radar) Front Bumper Fascia Support Brace Replacement (With Radar)