Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Rear Compartment Side Trim Insulator Retainer |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Cargo Tie Down Loop Bolt | 20 N.m (15 lb ft) |
| Center Pillar Upper Garnish Molding Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Armrest Pull Cup Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Inside Handle Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Pull Handle Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Trim Bolt | 2.5 N.m (22 lb in) |
| Quarter Window Trim Finish Panel Bolt | 2.5 N.m (22 lb in) |
| Rear Side Door Inside Handle Bolt | 2.5 N.m (22 lb in) |
| Rear Side Door Pull Handle Bolt | 2.5 N.m (22 lb in) |
| Rear Side Door Trim Bolt | 2.5 N.m (22 lb in) |
| Roof Rail Assist Handle Bolt | 6 N.m (53 lb in) |
| Roof Rail Rear Assist Handle Bolt | 6 N.m (53 lb in) |
| Sunshade Bolt | 2 N.m (18 lb in) |
| Sunshade Support Bolt | 2 N.m (18 lb in) |
| Windshield Garnish Molding Bolt | 2.5 N.m (22 lb in) |