Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Pipe Shield (4) - Install
- Fuel Pipe Shield Bolt (2) - Tighten 9 N.m (80 lb in)
- Fuel Pipe Shield Bolt (1) - Install and Tighten 9 N.m (80 lb in) [2x]
- Fuel Pipe Shield Bolt (3) - Install and Tighten 9 N.m (80 lb in)
Engine Wiring Harness Clip (1) @Fuel Pipe Shield - Install [3x]
- Engine Wiring Harness Clip (2) @Fuel Pipe Shield - Install [2x]
- Install the drivetrain and front suspension cradle to the vehicle. Drivetrain and Front Suspension Cradle Removal and Installation (Blackwing)Drivetrain and Front Suspension Cradle Removal and Installation (RWD LGY)Drivetrain and Front Suspension Cradle Removal and Installation (AWD LGY)
CAUTION:
Refer to Fastener Caution .