Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Direct Fuel Injection Fuel Rail-Bank 1 (1) - Remove - Fuel Injection Fuel Rail Assembly Replacement - Bank 1
Direct Fuel Injection Fuel Rail-Bank 2 (1) - Remove - Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Fuel Injector Wiring Harness (1) - Disconnect
Taking care not to touch or apply force to the injector tip or electrical connector, remove the fuel injector (1) by pressing down on the retainer lever to release the tab (2) and simultaneously rotating the injector 45 degrees and pulling straight out from the fuel rail.
- Remove and DISCARD the fuel injector retainer (3) from the fuel injector.
Using pliers, remove and DISCARD the fuel injector bushing (3) straight out from injector body.
- Remove and DISCARD the fuel injector O-ring (1) and plastic spacers (2).
- Fuel Injector Seal (4) - Remove and DISCARD [2x]