Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Assembly (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Air Cleaner Bolt (1) - Install and Tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Generator Battery Jumper Cable (2) - Install
Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Cable (4) @Air Cleaner Assembly (5) - Install
Retainer (3) - Install
Engine Wiring Harness (2) - Install
Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Retainer (2) - Install [2x]
Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Retainer (2) - Install
Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Engine Wiring Harness (3) - Install
Engine Wiring Harness Bolt (2) - Install and tighten [2x] 9 N.m (80 lb in)
Retainer (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Air Cleaner Outlet Duct (1) - Install - Auxiliary Air Cleaner Outlet Duct Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Outlet Duct (1) - Install - Air Cleaner Outlet Duct Replacement
Install all retainers to the air cleaner assembly.
Engine Control Module Bracket - Install - Engine Control Module Bracket Replacement