Camshaft Position Actuator Valve Solenoid Replacement - Intake
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Intake Manifold Cover Replacement |
|
| 1 | Camshaft Position Actuator Valve Solenoid Bolt [2x]
CAUTION:
Refer to Fastener Caution . Tighten 8.5 N.m (75 lb in) |
| 2 | Camshaft Position Actuator Valve Solenoid Procedure Disconnect the electrical connector. |
| 3 | Camshaft Position Actuator Magnet Gasket Procedure Use NEW camshaft position actuator magnet gasket. |