Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Air Side Baffle - Right Side (1) - Install
Radiator Air Side Baffle Retainer (1) - Install
Radiator Upper Bracket- Right Side (3) - Install
- Radiator Upper Bracket Bolt (2) - Install and tighten [2x] - Radiator Upper Bracket Replacement - Right Side (LGY, LSY)
- Wiring Harness Retainer (1) - Install
Radiator Air Side Baffle Retainer (1) - Install [2x]
Intake Air Duct (1) - Install
Radiator Air Front Upper Baffle- Right Side (1) - Install
Radiator Air Front Lower Baffle Retainer (2) - Install [2x]
- Radiator Air Upper Baffle Retainer (1) - Install [2x]
Radiator Air Lower Baffle (2) - Install
- Radiator Air Lower Baffle Retainer (1) - Install [6x]
Front Bumper Fascia (1) - Install - Front Bumper Fascia Replacement (without Blackwing) , or Front Bumper Fascia Replacement (with Blackwing)
Front Compartment Front Sight Shield (2) - Install
- Front Compartment Front Sight Shield Retainer (1) - Install [13x]
CAUTION:
Refer to Fastener Caution .
NOTE:
Refer to the procedure link for torque specification.