Single Use Fasteners and Components

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Engine Coolant Air Bleed Pipe Seal [2x]
Intake Manifold Seal [6x]

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Cooling System Draining and Filling (LGY Static Fill) Cooling System Draining and Filling (LGY GE 47716) Intake Manifold Replacement Radiator Surge Tank Inlet Hose Replacement (LGY) @Engine Coolant Air Bleed Pipe - Disconnect
1	Engine Coolant Air Bleed Pipe Bolt [2X] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Engine Coolant Air Bleed Pipe Procedure Install NEW seals.

Callout

Component Name

Preliminary Procedure

Cooling System Draining and Filling (LGY Static Fill) Cooling System Draining and Filling (LGY GE 47716)
Intake Manifold Replacement
Radiator Surge Tank Inlet Hose Replacement (LGY) @Engine Coolant Air Bleed Pipe - Disconnect

Engine Coolant Air Bleed Pipe Bolt [2X]

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Engine Coolant Air Bleed Pipe
Procedure
Install NEW seals.