Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Cooling Fan Motor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Engine Coolant Fan Bolt (1) - Install and tighten [4x] 7 N.m (62 lb in)
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (3) @Cooling Fan Motor - Connect
Radiator Outlet Hose (2) @Engine Radiator - Install
Radiator Outlet Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Coolant Pump (2) - Install - Charge Air Cooler Coolant Pump Replacement (LT4)
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Coolant Hose (2) - Move into position
Charge Air Bypass Valve Tube Clip (1) @Cooling Fan Motor - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle (1) - Install - Radiator Air Upper Baffle Replacement (LT4)
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Assembly (1) - Install - Air Cleaner Assembly Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Outlet Duct (1) - Install - Air Cleaner Outlet Duct Replacement
Fill the charge air cooling system. Charge Air Cooling System Draining and Filling (LT4)
Fill the cooling system to the proper level. Cooling System Draining and Filling (LT4 Static Fill) , or Cooling System Draining and Filling (LT4 GE 47716)
Start the engine and check for coolant leaks.