Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Carefully slide the upper intermediate steering shaft (2) through the intermediate steering shaft inner boot and the intermediate steering shaft boot from the inside of the vehicle.
- Extend the upper intermediate steering shaft (2) as far as possible and connect it to the mid intermediate steering shaft (1).
- Mid Intermediate Steering Shaft Bolt (3) - Install - Mid Intermediate Steering Shaft Replacement (AWD) , or Mid Intermediate Steering Shaft Replacement (RWD)
- Steering Column - Install - Steering Column Replacement (N37) , or Steering Column Replacement (N38)
- Remove the device used to prevent steering column rotation.