LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Rear Suspension) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 
Application Specification
Metric (English)
Rear Shock Absorber Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Adjust Link Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Cradle Front Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Link Inner Bolt Torque mating fastener
Rear Suspension Lower Control Arm Inner Bolt Torque mating fastener
Rear Suspension Lower Control Arm Outer Bolt
  • First Pass:
 150 N.m (111 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Trailing Arm Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Trailing Arm Bracket Bolt Torque mating fastener
Rear Suspension Upper Control Arm Inner Bolt Torque mating fastener
Rear Suspension Upper Control Arm Outer Bolt Torque mating fastener
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 
Application Specification
Metric (English)
Rear Suspension Shock Absorber Upper Mounting Nut 43 N.m (32 lb ft)
Rear Stabilizer Shaft Clamp Bolt 58 N.m (43 lb ft)
Rear Stabilizer Shaft Clamp Stud 58 N.m (43 lb ft)
Rear Stabilizer Shaft Link Bolt 58 N.m (43 lb ft)
Rear Stabilizer Shaft Link Nut 47 N.m (35 lb ft)
Rear Suspension Bracket Bolt 58 N.m (43 lb ft)
Rear Suspension Bracket Nut 58 N.m (43 lb ft)
Rear Suspension Trailing Arm Bracket Nut
  • First Pass:
 70 N.m (52 lb ft)
  • Final Pass:
 90 - 100 degrees
Rear Suspension Upper Control Arm Inner Nut
  • First Pass:
 70 N.m (52 lb ft)
  • Final Pass:
 90 - 100 degrees
Rear Suspension Upper Control Arm Outer Nut
  • First Pass:
 70 N.m (52 lb ft)
  • Final Pass:
 90 - 100 degrees
Rear Wheel Hub Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 15 - 30 degrees
scientia non olet · About LEMON Manuals