Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Rear Stabilizer Shaft Link (1) - Install
- CAUTION:
Refer to Fastener Caution .
Rear Stabilizer Shaft Link Nut (1) - Install and tighten 47 N.m (35 lb ft)
Rear Stabilizer Shaft Link Bolt (1) - Install and tighten 58 N.m (43 lb ft)
- Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Remove the support and lower the vehicle.
Rear Stabilizer Shaft Link (1) - Install NEW
- CAUTION:
Refer to Fastener Caution .
Rear Stabilizer Shaft Link Bolt (2) - Install and tighten 58 N.m (43 lb ft)
- Rear Stabilizer Shaft Link Nut (1) - Install and tighten 64.5 N.m (48 lb ft)
- Remove the support and lower the vehicle.