Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
If equipped, unclip the 3 electronic suspension rear vertical accelerometer retainers (1). Electronic Suspension Rear Vertical Accelerometer Replacement (FE3)
Chassis Rear Wiring Harness Clip (1) - Remove
- Chassis Rear Wiring Harness - Reposition
- NOTE:
Some components shown transparent for graphic clarity.
Rear Suspension Trailing Arm Nut (1) - Remove
- Rear Suspension Trailing Arm Bolt (3) - Remove and DISCARD
Rear Suspension Trailing Arm Bracket Nut (1) - Remove
- Rear Suspension Trailing Arm Bracket Bolt (2) - Remove and DISCARD
- NOTE:
Some components shown transparent for graphic clarity.
Rear Suspension Upper Trailing Link (1) - Remove