Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
{If equipped} Remove the 3 rear brake caliper cooling air scoop retainers (1).
- {If equipped}Rear Brake Rotor Cooling Duct Deflector Bolt (3) - Remove [3x]
- {If equipped}Rear Brake Rotor Cooling Duct Deflector (2) - Remove
Rear Suspension Trailing Arm Nut (1) - Remove
- Rear Suspension Trailing Arm Bolt (3) - Remove and DISCARD
Rear Suspension Trailing Arm Bracket Nut (2) - Remove
- Rear Suspension Trailing Arm Bracket Bolt (1) - Remove and DISCARD
Rear Suspension Lower Trailing Link (1) - Remove