Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Rear Wheelhouse Liner - Remove - Rear Wheelhouse Liner Replacement
Rear Suspension Lower Control Arm Cover (2) - Remove - Rear Suspension Lower Control Arm Cover Replacement
- Support the rear suspension lower control arm with a suitable jack stand.
Rear Shock Absorber Bolt (2) @Rear Suspension Lower Control Arm (3) - Remove and DISCARD
Electrical Connector (2) - Disconnect
- Rear Suspension Shock Absorber Upper Mounting Nut (1) - Remove [3x]
Rear Shock Absorber (1) - Remove