Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Position the NEW front and rear wheel hub bolt (1) in the flange of the hub assembly.
Install flat washers (2) and an OLD wheel nut (1) on the front and rear wheel hub bolt (3).
- Use a suitable tool to prevent the flange on the hub assembly from rotating.
- Tighten the wheel nut (1) until the front and rear wheel hub bolt (3) is fully seated.
- Remove the wheel nut (1) and flat washers (2).
Rear Wheel Hub (1) - Install - Rear Wheel Bearing and Hub Replacement
- Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Remove the support and lower the vehicle.