Outside Rearview Mirror Replacement (DWR with UV2)

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Glass and Sheet Metal Handling Warning . Preliminary Procedure Front Side Door Window Garnish Molding Replacement
1	Outside Rearview Mirror Bolt [3x] CAUTION: Refer to Fastener Caution . NOTE: Before fully removing the bolts, secure the outside review mirror to prevent damage. Tighten 9 N.m (80 lb in)
2	Outside Rearview Mirror NOTE: Inspect the mirror for proper operation before installing the front side door window garnish molding. Procedure Disconnect the electrical connector. Transfer components as necessary. Perform the camera calibration procedure. Video Processing Control Module Calibration

Callout

Component Name

WARNING:

Refer to Glass and Sheet Metal Handling Warning .

Preliminary Procedure Front Side Door Window Garnish Molding Replacement

Outside Rearview Mirror Bolt [3x]

CAUTION:

Refer to Fastener Caution .

NOTE:

Before fully removing the bolts, secure the outside review mirror to prevent damage.

Tighten
9 N.m (80 lb in)

Outside Rearview Mirror

NOTE:

Inspect the mirror for proper operation before installing the front side door window garnish molding.

Procedure

Disconnect the electrical connector.
Transfer components as necessary.
Perform the camera calibration procedure. Video Processing Control Module Calibration