Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Turbocharger Heat Shield (3) - Install
- Turbocharger Heat Shield Bolt (2) - Install and tighten 9 N.m (80 lb in)
- Turbocharger Heat Shield Bolt (1) - Install and tighten [2x] 15 N.m (11 lb ft)
{ If equipped } Heater Hose Clip Bracket Bolt (3) - Install and tighten - Heater Outlet Pipe Replacement (RWD with LGY) , or Heater Outlet Pipe Replacement (AWD with LGY from Auxiliary Water Pump to Heater Outlet Hose at Radiator Surge Tank) , or Heater Outlet Pipe Replacement (AWD with LGY from Auxiliary Water Pump to Auxiliary Heater Outlet Hose)
- Turbocharger Wastegate Actuator-Right Side - Install - Turbocharger Wastegate Actuator Replacement - Right Side
- Charge Air Cooler Inlet Air Hose-Right Side - Install - Charge Air Cooler Inlet Air Hose Replacement - Right Side
CAUTION:
Refer to Fastener Caution .