Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Rear Underbody Heat Shield (2) - Install
- Exhaust Heat Shield Retainer (1) - Install and tighten [10x] 1.5 N.m (13 lb in)
Rear Bumper Fascia Bolt (2) - Install [7x] - Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)
- Rear Wheelhouse Liner Bolt (1) - Install [2x] - Rear Wheelhouse Liner Replacement
Exhaust Muffler (1) - Install - Exhaust Muffler Replacement (LSY) , or Exhaust Muffler Replacement (LGY) , or Exhaust Muffler Replacement (LT4)
Floor Panel Tunnel Panel Front Brace (2) - Install - Floor Panel Tunnel Panel Front Brace Replacement
- Lower the vehicle.
- Inspect the exhaust system for leaks.
CAUTION:
Refer to Fastener Caution .