LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement (LSY, LGY) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5310178Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter Heat Shield (1) - Install

  2. GM5310138Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Catalytic Converter Heat Shield Nut (2) - Install and tighten 9 N.m (80 lb in)

  3. Catalytic Converter Heat Shield Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
  4. GM5309997Courtesy of GENERAL MOTORS COMPANY

    Turbocharger Heat Shield (1) - Install - Turbocharger Heat Shield Replacement (LSY) 

  5. Electrical Connector @ Heated Oxygen Sensor-Sensor 1 - Connect - Heated Oxygen Sensor Replacement - Sensor 1
scientia non olet · About LEMON Manuals