Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57)
Disconnect the electrical connector. (1)
- Retainer (2) - Remove [2x]
Retainer (1) - Remove [3x]
- NOTE:
If sensor is worn from contact with the rear brake rotor, then the rear disc brake pads must be replaced as well. Rear Disc Brake Pads Replacement (JL9, J56)
Rear Disc Brake Pad Wear Sensor (1) - Remove