Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
The lower brake caliper guide pin is equipped with a bushing and must be installed in the same position.
Rear Brake Caliper Guide Pin Seal (2) - Install NEW [2x]
- Rear Brake Caliper Guide Pin (1) - Install [2x]
- Rear Brake Caliper - Install - Rear Brake Caliper Replacement (JL9, J56) , or Rear Brake Caliper Replacement (J6H) , or Rear Brake Caliper Replacement (J57)
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Remove the support and lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Calibrate the park brake. Park Brake Calibration