LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Disc Brakes) >> Repair Instructions >> Front Disc Brake Pad Wear Sensor Replacement (J57, J6H) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5908463Courtesy of GENERAL MOTORS COMPANY

    Front Disc Brake Pad Wear Sensor (1) - Install

  2. GM5908464Courtesy of GENERAL MOTORS COMPANY

    Reposition the wheelhouse liner as necessary.

  3. Electrical Connector (2) @Retainer (1) - Install
  4. Connect the electrical connector. (2)
  5. GM5908465Courtesy of GENERAL MOTORS COMPANY

    Front Disc Brake Pad Wear Sensor (1) @Retainer (2) - Install

  6. Retainer (2) - Engage [5x]
  7. Engine Front Splash Shield - Install - Engine Front Splash Shield Replacement (AWD) , or Engine Front Splash Shield Replacement (RWD)
  8. Install the left front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  9. Remove the support and lower the vehicle.
  10. Using a scan tool, relearn the front disc brake pad wear sensor.
scientia non olet · About LEMON Manuals