Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Front Brake Caliper (1) - Install
- CAUTION:
Front Brake Caliper Guide Pin Bolt (1) @Front Brake Caliper - Install and tighten [2x] 40 N.m (30 lb ft)
- Front Brake Hose (2) @Front Brake Caliper - Install - Front Brake Hose Replacement (JL9)
- {If equipped} Front Disc Brake Pad Wear Sensor - Install - Front Disc Brake Pad Wear Sensor Replacement (J57, J6H)
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Bleed the brake system. Hydraulic Brake System Bleeding (J57, J6H, JL9)
- Check for brake system leaks.
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57)
- Remove the support and lower the vehicle.