Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Retaining Clip (1) - Engage [2x]
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Clip (2) - Install
Transmission Fluid Cooler Pipe Clip (1) - Install

CAUTION:

Refer to Fastener Caution .

Transmission Fluid Cooler Pipe Clip Bolt (3) - Install and tighten to 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket (2) - Install
Transmission Fluid Cooler Pipe Bolt (1) - Install and tighten to 9 N.m (80 lb in)
Lower the vehicle.
Check the transmission fluid level. Transmission Fluid Level and Condition Check
Inspect for transmission fluid leaks. Fluid Leak Diagnosis