Front Wheel Drive Intermediate Shaft Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle Removal the differential carrier assembly. Front Differential Carrier Assembly Replacement (LSY) , or Front Differential Carrier Assembly Replacement (LGY)
1	Front Wheel Drive Intermediate Shaft Procedure Attach the DT-44467 Output Shaft Assembly Remover/Installer to the shaft. Attache the GE-6125-1B Slide Hammer to the J-44467 Output Shaft Assembly Remover/Installer. Using the tools remove the shaft from the front drive unit. Special Tools DT-44467 Output Shaft Assembly Remover/Installer GE-6125-1B Slide Hammer Equivalent regional tools: Special Tools
2	Front Wheel Drive Intermediate Shaft Seal Procedure Use a NEW O-ring seal.
3	Front Wheel Drive Intermediate Shaft Retaining Ring Procedure Use a NEW retaining ring.