LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Hydraulic Brakes) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Brake Master Cylinder Reservoir Grommet
Brake Pedal Retainer
Front Brake Hose Washer
Rear Brake Hose Fitting Gasket
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Brake Hose Fitting Bolt 40 N.m (30 lb ft)
Brake Hose Fitting Bolt @ Front Brake Caliper 40 N.m (30 lb ft)
Brake Hose Fitting Bolt @ Front Suspension Strut 9 N.m (80 lb in)
Brake Master Cylinder Nut 25 N.m (18 lb ft)
Brake Master Cylinder Reservoir Bolt 9 N.m (80 lb in)
Brake Pedal Nut 25 N.m (18 lb ft)
Brake Pipe Fitting 18 N.m (13 lb ft)
Brake Pressure Modulator Valve Brake Pipe Fitting 18 N.m (13 lb ft)
Electronic Brake Control Module Bolt 3 N.m (27 lb in)
Front Brake Hose Fitting 40 N.m (30 lb ft)
Front Brake Hose Fitting Bolt 9 N.m (80 lb in)
Front Brake Pipe Nut 18 N.m (13 lb ft)
Rear Brake Hose Clip Bolt 9 N.m (80 lb in)
Rear Brake Hose Fitting 40 N.m (30 lb ft)
Rear Brake Pipe Nut 18 N.m (13 lb ft)