Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Brake Master Cylinder (1) - Remove - Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module (without MJK) , or Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module (with MJK)
Front Brake Pipe Retainer (2) - Disengage
- Rear Brake Front Pipe - Left Side (3) @ Front Brake Pipe Retainer (4) - Remove [2x]
- Rear Brake Front Pipe - Left Side (3) @ Front Brake Pipe Retainer (2) - Remove
- Rear Brake Pipe Nut (1) - Remove
- Cap the rear brake pipe inlet to prevent fluid loss and contamination.
- Maneuver the left side rear brake front pipe (3) out of the vehicle.