Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Front Brake Pipe - Right Side (2) - Install
- Remove the cap from the brake hose inlet fitting.
- Front Brake Pipe Nut (1) - Install and tighten - Front Brake Hose Replacement (J56) , or Front Brake Hose Replacement (JL9) , or Front Brake Hose Replacement (J57, J6H)
Brake Pipe Retainer (1) - Install [3x]
Remove the plug from the brake pressure modulator valve pipe.
- Front Brake Pipe - Right Side (2) @ Rear Brake Pipe Clip (1) - Install [2x]
- Front Brake Pipe Nut (3) - Install and tighten - Front Brake Front Pipe Replacement - Right Side (with Blackwing)
- Install the powertrain. Engine Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Bleed the brake system. Hydraulic Brake System Bleeding (J57, J6H, JL9) , or Hydraulic Brake System Bleeding (J56)
- Check the brake system for leaks.
CAUTION: