Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Maneuver the front brake pipe (3) into the vehicle.
- Remove the cap from the front brake pipe inlet.
- Front Brake Pipe Nut (1) - Install and tighten to 18 N.m (13 lb ft)
- Front Brake Pipe (3) @ Front Brake Pipe Retainer (2) - Install
- Front Brake Pipe (3) @ Front Brake Pipe Retainer (4) - Install
- Front Brake Pipe Retainer (2) - Engage
Brake Master Cylinder (1) - Install - Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module (without MJK) , or Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module (with MJK)
CAUTION:
Refer to Fastener Caution .