Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Brake System Control Module (1) - Install
- CAUTION:
Refer to Fastener Caution .
Electronic Brake Control Module Bolt (1) - Install NEW and tighten [4x] 3 N.m (27 lb in)
Electrical Connector (1) @ Brake System Control Module - Connect
- Front End Sheet Metal Cross Brace - Install - Front End Sheet Metal Cross Brace Replacement (Impact Bar Bracket) , or Front End Sheet Metal Cross Brace Replacement (Plenum without Blackwing) , or Front End Sheet Metal Cross Brace Replacement (Plenum with Blackwing)
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Reprogram the brake system control module. Control Module References