Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Plenum Front Panel - Remove - Plenum Front Panel Replacement (without Blackwing) , or Plenum Front Panel Replacement (with Blackwing)
- Disconnect the brake fluid level sensor electrical connector.
Disconnect the electrical connector: (1)
Brake Master Cylinder Nut (1) - Remove [4x]
- Plug the master cylinder outlet ports to prevent brake fluid loss and contamination.
- Without separating the engine from the transmission, remove the powertrain. Engine Replacement
Retainer (1) - Release [2x]
- Brake Pressure Modulator Valve Brake Pipe Fitting (2) - Remove
- Brake Pressure Modulator Valve Brake Pipe Fitting (3) - Remove [2x]
- Plug the brake pipes to prevent brake fluid loss and contamination.
Retainer (1) - Release
- Brake Pressure Modulator Valve Brake Pipe Fitting (2) - Remove
- Maneuver the brake pressure modulator valve brake pipe (3) out of the vehicle
- Transfer components as necessary.