Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Air Inlet Housing (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Heater and Air Conditioning Evaporator and Blower Upper and Blow Lower Case Bolt (1) - Install and tighten [3x] 1.5 N.m (13 lb in)
Courtesy of GENERAL MOTORS COMPANY

Heater and Air Conditioning Evaporator and Blower Upper and Blow Lower Case Bolt (2) - Install and tighten to 1.5 N.m (13 lb in)
Connect the electrical connector. (1)
Courtesy of GENERAL MOTORS COMPANY

Heater and Air Conditioning Evaporator and Blower Module (1) - Install - Heater and Air Conditioning Evaporator and Blower Module Removal and Installation