Shift Shafts
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 1 | Shift Shaft Detent Lever Bolt |
| 2 | Shift Fork Position Sensor Magnet |
| 3 | Offset Shift Lever |
| 4 | Shift Shaft Bearing |
| 5 | 1st and 2nd Shift Fork Pin [2x] |
| 6 | Offset Shift Lever |
| 7 | Shift Shaft Bearing |
| 8 | 1st and 2nd Shift Fork |
| 9 | 1st and 2nd Shift Fork Insert [2x] |
| 10 | Shift Interlock Plate |
| 11 | Selector Control Lever |
| 12 | Reverse Shift Block Interlock Pin |
| 13 | 1st and 2nd and 3rd and 4th Shift Shaft |
| 14 | 3rd and 4th Shift Fork |
| 15 | 3rd and 4th Shift Fork Insert [2x] |
| 16 | 1st and 2nd and 3rd and 4th Shift Shaft |
| 17 | Shift Shaft Bushing [4x] |
| 18 | Reverse Shift Lever Pin |
| 19 | Reverse Shift Lever |
| 20 | Shift Lever Retaining Ring |
| 21 | 5th and Reverse Shift Fork Insert |
| 22 | 5th and 6th Shift Lever |
| 23 | 5th and 6th and Reverse Shift Shaft |
| 24 | 5th and 6th Shift Fork Insert [2x] |
| 25 | Shift Lever Shaft |
| 26 | 5th and 6th Shift Fork |
| 27 | 5th and 6th Gear Synchronizer Hub Retaining Ring |
| 28 | Manual Transmission Shift Shaft Collar |
| 29 | 1st and 2nd Shift Fork Pin |
| 30 | Reverse Shift Fork Insert [2x] |
| 31 | Reverse Shift Fork |
| 32 | Reverse Shift Fork Retaining Ring |
| 33 | 5th and 6th and Reverse Shift Shaft |