Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Mount (2) - Install

NOTE:

For proper bolt alignment, loosely install all mount bolts prior to tightening to specifications.

Transmission Mount Bolt (1) - Install and hand tighten [2x]
Courtesy of GENERAL MOTORS COMPANY

Transmission Mount Bracket Bolt (1) - Install and hand tighten [4x]
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Tighten the 2 transmission mount bolts (1) to 61 N.m (45 lb ft).
Courtesy of GENERAL MOTORS COMPANY

Tighten the 4 transmission mount bolts (1) to 41 N.m (30 lb ft).
Remove the jack stand.
Lower the vehicle.